16
CABLE SPECIFICATIONS
An appropriate multi-core cable must be used to maintain the cable gland
seal into the base station.
Total Length
Cable Size
Cable from AA702 Base Station to the Power Supply
/HVVWKDQPIW
PP
$:*
PIWPIW
PP
$:*
PIWPIW
PP
$:*
Cable from AA702 Base Station to Outputs
/HVVWKDQPIW
PP
$:*
PIWDQGPIW
PP
$:*
PIWDQGPIW
PP
$:*
Cable from Motor Load Wires
8SWRPIW
PP
$:*
2.7 WIRING
2.7.1 MOTOR LOAD WIRES (BROWN AND WHITE) OUTPUTS 5 & 6
Rope & Chain Counting:
The brown and white wires must be connected direct to the
ZLQGODVVPRWRUWHUPLQDOVIRUURSH FKDLQFRXQWLQJ
A 1000 Ohm resister must be
¿
tted
near the motor terminal
for short circuit protection. The motor load terminators supplied
LQWKHNLWKDYHPRWRUWHUPLQDOFRQQHFWRUVZLWKD2KPUHVLVWRUSUH¿WWHG
,IWKH$$LV¿WWHGWRDQ
all-chain windlass,
DWKUXVWHURUDX[LOLDU\HTXLSPHQW2XWSXWV
DQGFDQEHXVHGIRURWKHURSWLRQV
,QWHUORFNSURWHFWLRQLVLQFOXGHGLQWKHV\VWHP'RQRW¿WGLRGHVRULQWHUORFNGHYLFHVWR
outputs as these will prevent the system from operating correctly.
All battery and motor cables must be ring type, insulated to prevent short circuits and
LQVWDOOHGQRFORVHUWKDQIWPPDZD\IURPWKHVHQVRUKHDG
7RUHGXFHWKHSRWHQWLDOIRULQWHUIHUHQFHDOOFDEOHVPXVWEHORFDWHGDWOHDVWIWPP
DZD\IURPDQ\HTXLSPHQWWUDQVPLWWLQJRUFDEOHVFDUU\LQJUDGLRVLJ)RU66%
radios, cables and antennas or radar antennas.
'RQRWOHDYHFDEOHVKDQJLQJORRVHWKH\PXVWEHWLHGLQSODFHZLWKFDEOHWLHV
2.7.2 MULTIPLE AUTOANCHOR INSTALLATIONS
It is important when wiring multiple AutoAnchor products that potential differences do not
RFFXUDORQJWKHJURXQGFRQQHFWLRQ7KLVFDQFDXVHLQFRUUHFWFRXQWLQJ(QVXUH$$
DQG$$FRQVROHVDQG$$EDVHVWDWLRQVDUHVWDUJURXQGHGDQGWKDWWKHUHDUHQR
other high current paths between consoles.
All wiring for multiple installations is run in
parallel.
Refer to wiring diagrams for further details.