15
9RU9'&SRZHUVXSSO\LVUHTXLUHGWRWKH$$EDVHVWDWLRQ
Check battery polarity before connecting power and ensure output terminals will not short.
Refer to the manufacturer’s speci
¿
cations
IRUIXVHEUHDNHULVRODWRUDQGPDLQSRZHU
FDEOHVSHFL¿FDWLRQVIRUWKHHTXLSPHQWEHLQJFRQWUROOHGE\WKH$$
(QVXUHDQ\IXVHEUHDNHURQWKHFRQWUROFLUFXLWKDVDUDWLQJDSSOLFDEOHWRWKHFXUUHQWORDGV
FRQQHFWHGWRWKHRXWSXWV$$2XWSXWPD[LPXPLV$PSV$QDGGLWLRQDOLVRODWLQJ
switch should be installed for controls if the main breaker or isolator is not readily acessible
from the helm.
0XOWLSOHEDWWHU\EDQNQHJDWLYHWHUPLQDOVPXVWEHSHUPDQHQWO\FRQQHFWHGWRJHWKHUWR
become the common negative return (ground).
2.5.1 WINDLASS INSTALLATIONS
3RZHUVXSSO\WRWKH$$EDVHVWDWLRQPXVWEHIURPWKHZLQGODVVFRQWUROFLUFXLWDORQJ
with all other windlass controls eg. toggle switch, remote switches, deck switches, other
AutoAnchor devices.
Power supply must not be from the motor positive near the
windlass.
2.5.2 MULTIPLE BASE STATION INSTALLATIONS
The master base station must be powered up when using a slave base station application.
6HSDUDWHEDVHVWDWLRQVPD\EHSRZHUHGIURPVHSDUDWHVXSSOLHVKRZHYHU
if 2 products
are connected to the same base station they must be powered by the same supply,
or relays must be used as a means of isolation.
To maintain power to the windlass it is
recommended that the windlass be attached to the master base station.
THE POWER SUPPLY MUST BE DISCONNECTED WHEN INSTALLING,
CONNECTING OR CHANGING THE WIRING
2.5 POWER SUPPLY
2.6 VOLTAGE LEVELS
1HLWKHUWKHZLQGODVVQRUWKH$XWR$QFKRUZLOORSHUDWHZLWKLQVXI¿FLHQWSRZHU6HHPLQLPXP
YROWDJHVEHORZ%DWWHULHVPXVWEHSURSHUO\PDLQWDLQHGDQGFKDUJHGDQGDOOFRQQHFWLRQV
DQGZLUHVPXVWEHRIJRRGTXDOLW\DQGWKHFRUUHFWJDXJHWRSUHYHQWYROWDJHGURS
Minimum Voltage Required
12V DC System
24V DC System
0LQLPXPYROWDJHUHTXLUHGWRVWDUWZLQGODVV
9'&
9'&
If the windlass is already operating, this is the
PLQLPXPYROWDJHUHTXLUHGWRFRQWLQXHRSHUDWLQJ
.
9'&
9'&
