38
Note:
7KH$$UHPRWHFRQVROHDXWRPDWLFDOO\WXUQVRIIDIWHUDSUHVHWWLPHZLWKRXWXVH
'HIDXOW$XWR2IILVPLQXWHV7KH$XWR2II7LPHFDQEHFKDQJHGIURPEHWZHHQWR
PLQXWHVLQWKH6HWXSPHQX6HHSDJH
For an accurate reading always ensure the AA710 display
reads 0.0 before deploying the anchor. See Clear to Zero on page 40.
&RXQWLQJFRQWLQXHVLIWKH$$UHPRWHFRQVROHLVWXUQHGRIIDQGLIWKH
windlass is
operated by another control eg foot switches.
4.5.2 AUTOMATIC AND MANUAL WINDLASS OPERATION
.HHS\RXU¿QJHURQWKHEXWWRQWRGHSOR\WKHDQFKRUPDQXDO
ly or use the automatic function
IRUKDQGVIUHHDQFKRUGHSOR\PHQWDQGUHWULHYDO6HHWKHLQVWUXFWLRQVIRUERWKRSWLRQVEHORZ
4.5.3 MANUAL WINDLASS OPERATION
Deploy and Retrieve the Anchor Using Manual Operation
7XUQWKH$$RQ
Clear the safety lock.
Press and hold the up or down button to deploy or retrieve the anchor. Releasing
the button stops the windlass operation.
Ensure the anchor is fully docked and secured before moving the boat.
DOCKING ALARM:
'XULQJUHWULHYDOWKHZLQGODVVZLOOVWRSDQGWKH$$EHHSVWRZDUQ
the operator the anchor is at the preset docking distance. Press and hold the button to
continue retrieval. If the system has been set up for dual speed. It will change to slow at
this point.
Extra care must be taken at this stage of retrieval.
8VHWKH$XWRPDWLF)XQFWLRQWR
3UHVHWWKHOHQJWKRIURGHIRUGHSOR\PHQW
+DYHKDQGVIUHHRSHUDWLRQRIWKHZLQGODVV
Retrieve the anchor automatically to the preset docking distance.
1RWH)RUURSHFKDLQFRXQWLQJLIWKHVHQVRURUORDGVHQVLQJZLUHVDUHQRWLQVWDOOHGFRUUHFWO\
the automatic function
will not operate.
An Installation warning message will display on
the screen. The windlass can still be operated using manual operation but the AutoAnchor
will not count accurately.
4.5.4 AUTOMATIC WINDLASS OPERATION
WARNING
There is an inherent risk when using any automatic function on
a boat. If you choose to use the AA710 automatic functions, you must
still control and supervise all windlass and anchoring operation.
4.5.4.1 Safety Override
Press any button on the AA710 to stop the windlass during automatic release or
retrieval.
In an emergency shut off the power to the windlass using the isolating/
breaker switch.
