45
PART 5 MAINTENANCE
The AutoAnchor does not contain any user servicable parts.
8VHUPDLQWHQDQFHLVOLPLWHGWR
&KHFNLQJDOOFDEOHVDQGFRQQHFWLRQVIRUVLJQVRIZHDURUGDPDJHDQGUHSODFLQJWKHPDV
necessary.
&KHFNLQJWKHVHQVRUKHDGLVQRWZRUQDQGKDVQRWPRYHGRXWRIDOLJQPHQWZLWKWKH
magnet and replacing the sensor if necessary.
After any sensor repairs or changes to
sensor installation reset the sensor. See page 37.
&KHFNLQJWKHPDJQHWLVQRWZRUQRUFRUURGHGDQGUHSODFLQJWKHPDJQHWLIQHFHVVDU\
1RWH'RQRWXVHFKHPLFDORUDEUDVLYHPDWHULDOVWRFOHDQWKHFRQVROHXQLW,ILWLVGLUW\ZLSH
it with a clean damp cloth. Avoid wiping the display screen with a dry cloth as this could
scratch the screen.
5.1 REPLACING THE BATTERY IN THE AA710 CONSOLE
Replace the batteries when the battery indicator shows the battery level
LVORZ'RQRWDOORZWKHEDWWHU\OHYHOWRIDOOWR]HUR7ZRDONDOLQH$$9
EDWWHULHVDUHUHTXLUHG
7XUQRIIWKHFRQVROHDQGWXUQRIIWKHSRZHUWRWKHEDVHVWDWLRQ2SHQ
the console case by removing the screws and lifting off the back cover.
Remove the used batteries and replace them with new batteries in the
same position. Check that the perimeter seal is clean and undamaged.
3XWWKHFRYHULQSODFHUH¿WWKHVFUHZVDQGWLJKWHQHYHQO\
Do not
overtighten the screws.
%DWWHU\,QGLFDWRU
Battery Care
Insert batteries with the correct polarity.
Replace both batteries at the same time.
'RQRWPL[ROGDQGQHZEDWWHULHVRUGLIIHUHQWW\SHVRUEUDQGVRIEDWWHULHV
Remove exhausted batteries immediately from the device.
Remove batteries and store separately if an extended period of non use is anticipated.
)ROORZEDWWHU\PDQXIDFWXUHU¶VLQVWUXFWLRQVIRUGLVSRVDORIXVHGEDWWHULHV
Note: User settings are not affected by power loss or changing the batteries.