37
4.4 SET UP AND TESTING
%HIRUHXVHWKH$XWR$QFKRUPXVWEHFRUUHFWO\VHWXSIRUWKHHTXLSPHQWLWLVWRFRQWURODQG
WKHQWHVWHGLQDVDIHHQYLURQPHQW)RUH[DPSOHWKH$XWR$QFKRUZLOOQRWFRXQWFRUUHFWO\
if the windlass selection is wrong or the windlass is not standard (eg it is installed with a
different chainwheel or motor).
4.3.1 WHEN CONTROLLING A WINDLASS
PDLQWDLQDFOHDUYLHZRIWKHZLQGODVVURGHDQGRUDQFKRUSOXVDQ\RSWLRQDORUDX[LOLDU\
DQFKRULQJHTXLSPHQWGXULQJZLQGODVVRSHUDWLRQ
DOZD\VHQVXUHWKHDQFKRULVIXOO\GRFNHGDQGVHFXUHGEHIRUHPRYLQJWKHERDW
4.3.2 WHEN CONTROLLING A THRUSTER
GRQRWRSHUDWHFORVHWRVZLPPHUVWKHSRZHUIXOVXFWLRQRIZDWHUFRXOGFDXVHVHULRXV
LQMXU\
QHYHUUXQWKHWKUXVWHURXWRIWKHZDWHUWKLVFDQFDXVHVHULRXVGDPDJHWRWKHPRWRU
UXQQLQJDWKUXVWHUZLWKRXWUHVLVWDQFHIURPWKHSURSHOOHUFDQDOVRFDXVHVHULRXVGDPDJH
WRWKHPRWRU
LIWKHWKUXVWHUVWRSVJLYLQJWKUXVWZKLOHWKHPRWRULVUXQQLQJWXUQLWRIILPPHGLDWHO\
7KH$XWR$QFKRUPDQXIDFWXUHUDQGVXSSOLHUDFFHSWQROLDELOLW\IRUSHUVRQDOLQMXU\RUSURSHUW\
damage resulting from failure to follow the installation and operating instructions or the use
of the AutoAnchor in a way that may cause accidents or damage or that may violate the law.
4.5 WINDLASS OPERATION WITH THE AA710
Installation and set up must be complete and the anchor must be
docked before starting this process.
Clear the AutoAnchor to zero if necessa
U\6HHSDJH
'HSOR\WKHDQFKRUXVLQJWKH$XWR$QFKRU,QLWLDOO\WKHVWDWXVEDUZLOO
display “
Sensor tuning”.
Continue deployment until this message
changes to
“Tuning done”. This must be done in one continuous
operation without taking your
¿
nger off the button until the
“Tuning done” message displays. This could take up to 10 turns
of the windlass.
Retrieve the anchor to the docked position and clear
to zero if needed.
Note: If you do need to take your
¿
nger off the button, start the
process again.
Rope/Chain System:
The default rode set up is chain only. If rope
and chain rode is selected without the correct sensor and magnet set
XSD³6HQVRULQVWDOODWLRQQRWFRPSDWLEOHZLWKURSHDQGFKDLQVHWWLQJ´
message will display. Check the installation and rode set up and reset
the sensor to restart the tuning process.
5HTXLUHGIRUDOOVHQVRUVRWKHUWKDQDPRWRUGULYHQUHHGVHQVRU7KLVVFUHHQDXWRPDWLFDOO\
GLVSOD\VRQ¿UVWXVHRULI)DFWRU\'HIDXOWVDUH
loaded, the sensor is reset or there has been
a loss of sensor signal.
4.5.1 PLUG & PLAY SENSOR TUNING
