Maxima 2 Levels, Operating & Maintenance Manual

Page: 22 / 52

22
4.3 Spaces needed for use of the machine
The machine must be positioned on a solid, level and even
floor that can bear its weight and must not be near heat
sources or be directly exposed to sunlight.
Keep the machine air inlets clear to allow adequate air
circulation around it.
4.4 Installation and assembly sequences of machine components
For safety reasons and to avoid damage during transportation, some machine components are removed from it. Therefore,
the machine user must follow these assembly instructions for machine components:
1 Labyrinth and labyrinth tube
•
Remove the refrigeration tank cover (1) and the fixing rod (2)
from the rotary pressure pump cover (3).
•
Insert the labyrinth (4) and the labyrinth tube (5) in the pump cover
hole, through the opening (6) on the front panel.
•
Position the fixing rod (2) in its housing to lock the labyrinth (4)
in place.
2 Dispensing tap complete with outlet nozzle
•
Position the dispensing tap (7) so the slot (8) on the rear side is
aligned with the pin (9) located on the opening of the front panel.
•
Insert the dispensing tap completely and turn it in an anti-clock-
wise direction, so the outlet nozzle (10) is located in a dispensing
position (turned downwards).
3. Drip tray and drip tray holder
•
Insert the drip tray (11) in the slot (12) on the bottom part of the
front panel.
1
2
3
4
2
5
7
10
9
8
7
6
12
11