Maxima 2 Levels, Operating & Maintenance Manual

Page: 21 / 52

Chapter 4
Installation
21
INSTALLATION MUST ONLY BE PERFORMED BY QUALIFIED TECHNICAL PERSONNEL.
Take care when removing the straps, as they
may accidentally hit the operator when cut.
During lifting pay special attention to the
power cable, taking care not to damage it.
THE MACHINE MUST BE POSITIONED IN A LOCATION PROTECTED FROM RAIN AND SUN.
OPERATING THE MACHINE IN AMBIENT CONDITIONS THAT DO NOT CONFORM TO THE INDI-
CATIONS IN THIS MANUAL WILL VOID THE GUARANTEE.
USE OF THE MACHINE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IS STRICTLY PROHIBITED.
4 INSTALLATION INSTRUCTIONS
4.1 General requirements
Once the package has been deposited in the machine installation
area, cut the straps (A) or remove the metal points (B), open the
case (C) and remove the internal protection cards (D).
Remove the documents and accessories located on the outside
of the machine.
Lift the machine out of the case using hoisting equipment suitable
for the weight of the machine.
4.2 Ambient conditions
Ambient conditions required for machine operation:
• Temperature: +2°C to +30°C (35.6°F to 86°F)
! Humidity: 10% - 95% (with no condensation)
Ambient conditions other than those specified may cause serious damage to the machine and in particular to the electrical
equipment and the refrigerating system.
A
C
D
B