Maxcess SE-46C, Commissioning Manual

Page: 7 / 20

COMMISSIONING OF D-MAX 2 - 4
SE-46C
Commissioning of the web guide controllers
www.maxcess.eu MI 1071 1 A
Inbetr
iebna
hme D-M
AX.fm
D-MAX OI-N operator interface:
∙ Select menu 1y.5.1.2.1 for S 02 or 1y.5.1.4.1 for S 04
(Hardware IOs

Sensor Setup

S 02 (X5/2) or S 04 (X9/2)

Calibration

1. Reference Value (Lower Limit))
∙ Press the ENTER key
OI-TS operator interface:
∙ Select signal assignment 10mA
D-MAX OI-N operator interface:
∙ 2. Reference Value (Upper Limit)
∙ Press the ENTER key
∙ Press the ENTER key to save the calibration
∙ Press and hold the ESC key until you reach the user level of
the D-MAX controller
1.5. Exit menu 1K.8.3
Simulate Analog Signals
on
the SE-46C OI-TS operator interface:
∙ Press the CONFIRMATION button to exit menu 1K.8.3
∙ Press the RETURN button twice to return to the operator level
2. Setting the ASC
(Automatic Sensor Control)
Note:
Connection to X5: job with y = 'J'
Connection to X9: job with y = 'K'