Maxcess SE-46C, Commissioning Manual

Page: 18 / 20

COMMISSIONING OF FIFE-500 4 - 4
SE-46C
Commissioning of the web guide controllers
www.maxcess.eu MI 1071 1 A
OI-TS operator interface:
∙ Select signal assignment 10mA
FIFE-500 operator interface:
∙ Press the button to determine the second reference value
∙ Press the YES button to save the calibration
∙ Press the ACCEPT button to exit menu
∙ Press the RETURN button to return to the operator level
1.5. Exit menu 1K.8.3
Simulate Analog Signals
on
the SE-46C OI-TS operator interface:
∙ Press the CONFIRMATION button to exit menu 1K.8.3
∙ Press the RETURN button twice to return to the operator level
2. Setting the ASC
(Automatic Sensor Control) FIFE-500 operator interface:
∙ Select menu 1E.1.5.1.3
(Press Setup button

Press ASC button

Press ASC Settings
button)
∙ Select the ASC S2 tab
∙ Activate ASC State (LED green)
∙ Select S1 source
∙ Select O/- mode