17
3.2
PCtV BRACKEt INStALLAtIoN & CoNSoLE SEtUP - 5x tM LAM CoNSoLE
- CoNtINUEd
BRACKEt INStALLAtIoN & CoNSoLE SEtUP
6) Plug the controller wire (this will have a white RJ45 connector on one end) into the bottom left hand corner of the UCB (Figure G).
NOTE:
There is a wire in this location that will need to be removed to plug in the controller wire.
7) Plug the net wire (this will have a yellow RJ45 connector on one end) into the net wire coming up the console mast (Figure H).
NOTE:
The
net wire is only needed if wired internet will be used.
8) Mount the front plate to the TV using 2 screws sent with the TV bracket kit (Figure I).
9) Plug the coax cable into the port on the PCTV (Figure J).
10) Plug the TV power wire into the port on the PCTV (Figure K).
11) Plug end of the controller wire labeled To TV into the port marked PCTV on the PCTV (Figure L).
FIGURE G
FIGURE H
FIGURE I
FIGURE J
FIGURE K
FIGURE L
