25
1) Remove the console from the unit as outlined in Section 9.1.
2) Remove the 6 screws holding the console front to the back and split the console (Figures A & B).
3) Remove the 2 screws holding on the blank headphone jack plastic to the console, and remove the plastic (Figures C & D).
4) Remove the wire in the console that goes from the UCB to the board on the console back (Figure E).
5) Install the new Y cable sent with the TV bracket kit to replace the wire removed in Step 4 (Figure F).
FIGURE A
FIGURE B
FIGURE C
FIGURE d
FIGURE E
FIGURE F
BRACKEt INStALLAtIoN & CoNSoLE SEtUP
3.4
PCtV BRACKEt INStALLAtIoN & CoNSoLE SEtUP - 5x UNIVERSAL LAM CoNSoLE
NOTE: There is more than one version of the Universal 5x console, please make sure the correct instructions for the console are being
used.
