Matrix Fitness PCTV Service Manual Download Page 55

Page: 55 / 66

2) When the scan is successful, the Save Configuration to Server screen will appear. Touch SAVE CONFIGURATION TO SERVER (Figure B).

NOTE:

If the facility has given the installer a list of either digital or analog channels to modify or to order in a particular sequence, see the

instructions in the Appendix Modifying Channel Settings for modifying scanned channels. Once the scanned channels have been modified, the

configuration still needs to be saved.

3) On the next page select FINISH (Figure C). The PCTV Screen will reboot and come back up with a GO button. Congratulations, the

installation process is complete! When installation of all units at the site is complete, contact Netpulse at the # on the screen.

FIGURE B

FIGURE C

4.4 SEttING UP tHE PCtV - CoNtINUEd

PRoGRAMMING tHE PCtV

Summary of Contents for PCTV



































































Search results

Summary of Contents for PCTV

Reviews:

Related manuals for PCTV

Brands by name

Popular brands

Matrix Fitness PCTV, Service Manual

Search results

Summary of Contents for PCTV

Reviews:

Related manuals for PCTV

Brands by name

Popular brands