![background image](http://html.mh-extra.com/html/massoth/emotion-s/emotion-s_installation-manual_1735977051.webp)
51
CV - table (sound settings)
The sound settings vary with the sound programmed in the decoder therefore the
settings are not listed. (D = Default, A = analog operation)
Table of configuration variables
CV Description
A Range Note
131 Add. sound 1 : Switching command
*
0...16 0=deactivated:
sound can not be triggered by
F-key
1…16 = F-key assignment:
sound will be triggered by the re-
spective
F-key
Note: Only one sound may be
programmed to an F-key. In case
multiple sounds are assigned to
one F-key only the first sound
programmed will be triggered.
132 Add. sound 2 : Switching command
*
0...16
133 Add. sound 3 : Switching command
*
0...16
134 Add. sound 4 : Switching command
*
0...16
135 Add. sound 5 : Switching command
*
0...16
136 Add. sound 6 : Switching command
*
0...16
137 Add. sound 7 : Switching command
*
0...16
138 Add. sound 8 : Switching command
*
0...16
139 Add. sound 9 : Switching command
*
0...16
140 Add. sound 10 : Switching command
*
0...16
141 Add. sound 11 : Switching command
*
0...16
142 Add. sound 12 : Switching command
*
0...16
147
Amplifier (Sound) Off/On : Switching
command
6
0...16
148 Loco start up/shut down, resp. cylinder
sound (Steam engine)
5
0...16
149
Configuration register Massoth-sound
2 0...255 see attachment 6
150 Starting inhibit between starting-phase
(Since V2.2)
0
0...3
0=Off
1=Digital on
2=Analog on
3=D Analog on
If on, loco starts after starting-
phase