Masimo Rad-67 Pulse CO-Oximeter Operator'S Manual Download Page 65

Page: 65 / 106

www.masimo.com

Masimo

Chapter 6: Alerts and Messages

The following chapter contains information about alerts and messages.

For more information, see

Chapter 7: Troubleshooting

on page 67.

About Alerts

The

Alert Acknowledgment

icon is an indicator as well as a functional button. It always

indicates the presence of alerts, and it can be used to acknowledge alerts.

Icon

Appearance

Description

Visual

Alerts

There are currently no active alerts, and no alerts have
been acknowledged.

Note:

If an alert has been acknowledged, this icon also

appears.

There is currently at least one active alert that has

not

been acknowledged.

Yes

Alert Interface

Alert Source/Example

Explanation

The example shown here is a "Low Battery" alert. Note
that the border of the entire Rad-67 display is

illuminated, and the explanation of the alert is shown in
the Status Bar (Low Battery).

Summary of Contents for Rad-67 Pulse CO-Oximeter











































































































Search results

Summary of Contents for Rad-67 Pulse CO-Oximeter

Reviews:

Brands by name

Popular brands

Masimo Rad-67 Pulse CO-Oximeter, Operator'S Manual

Search results

Summary of Contents for Rad-67 Pulse CO-Oximeter

Reviews:

Brands by name

Popular brands