Rad-67
Chapter 5: Spot-Check
www.masimo.com
60
Masimo
If during the spot-check, low signal stability is detected,
Rad-67 instructs the user to keep the measurement site
stable.
If a low perfusion condition occurs, Rad-67 instructs the
user to select a new location to place the sensor.
Complete the Spot-Check
After a spot-check is performed, the values display.
Note:
The spot-check measurement displays for five (5)
minutes or until the sensor is removed, whichever occurs
first.
To complete the spot-check session, remove the sensor
from the patient and the spot-check results screen
displays. See
Spot-Check Results
on page 61.
