User Manual
P a g e
|
34
of
52
Available Options:
UP
DOWN
UP/DOWN
DOWN/UP
Repeat
Repeat Counts
Defines how many times the steps are repeated
Range:
1 to 9999
Starting the RAMP
To Enable Ramp, select Source Type as RAMP.
If this mode is enabled,
(Rising Ramp) or
(Falling Ramp) or
(
Ramp Hold @ 100%
) or
(
Ramp Hold @ 0%
) icon will appear in
Source Display Window according to current RAMP mode in RUN
Page and F1 & F2 Button change to
START
&
SETTING
respectively.
RAMP can be started by Pressing
F1
key (START). After that F1 &
F2 key will change to
PAUSE
&
STOP
respectively. So by
pressing F1 & F2 key running RAMP can be PAUSE or STOP at
any time in RUN Page.
NOTE:
While RAMP is running RAMP settings can’t be accessible
and Source Page Parameter settings can’t be change. Stop RAMP
before changing any settings.