User Manual
P a g e
|
16
of
52
3. Start Up & Basic Operations
3.1 Power ON or OFF
To set the instrument power ON, press and release this
button down until the display comes on. During the
power on sequence, the instrument shows a Startup
Message and then shows the applicable data.
To set the instrument p
ower off, press and hold (≈ 2
seconds) this button again. When the power is off, the
last set of configuration options stays in memory
3.2 The User Interface
Every time LC-12 is switched on, the startup message ends in RUN
Page.
There are 4 Display Mode available in RUN Page.
1. M Source
2. Measure Only
3. Source Only
4. Switch Test + Source
This Display Mode can be selected from MENU
DISPLAY Page.
In case of Dual Mode Display Screen is divided into two parts. Due to
that only few additional info will appear on RUN Page. But Which
Information to be shows can be selectable in Display Mode Menu. Refer
Section 3.2.3 on Page-19 for more info.
