MARUTI SUZUKI Ciaz, Owner'S Manual

Page: 68 / 249

2-51
BEFORE DRIVING
79MH0-74E
Lighting Operation
60MK011
To turn the lights on or off, twist the knob on the
end of the lever. There are three positions:
OFF (1)
All lights are off.
(2)
Front position lights, tail lights, license
plate light and instrument lights are on, but
headlights are off.
(3)
Front position lights, tail lights, license
plate light, instrument lights and headlights
are on.
60MK012
With the headlights on, push the lever forward
to switch to the high beams (main beams) or
pull the lever toward you to switch to the low
beams. When the high beams (main beams)
are on, a light on the instrument panel will
come on. To momentarily activate the high
beams (main beams) as a passing signal, pull
the lever slightly toward you and release it
when you have completed the signal.
Lights “On” reminder (if equipped)
A buzzer/chime sounds to remind you to
turn off the lights if they are left on when
the ignition key is removed and the driver’s
door is opened.
Front Fog Light Switch (if
equipped)
64J058
The front fog light comes on when the fog
light switch is pushed in with the position
lights, tail lights and/or the headlights are
on. An indicator light above the switch will
be lit when the front fog light is on.
NOTE:
In some countries the lighting operation
may be different from the above descrip-
tion according to local regulations.
Headlight Leveling Switch
80JM040
Level the headlight beam according to the
load condition of your vehicle by turning
this switch. The chart below shows the
appropriate switch position for different
vehicle-load conditions.
(3)
(2)
(1)
EXAMPLE
EXAMPLE
EXAMPLE
Vehicle Load Condition
Switch Position
Petrol Diesel
Driver only 0 0
1 passenger
(in front seat)
1 0
4 passengers,
no cargo
2 1
4 passengers,
cargo added
4 2
full cargo 4 3
EXAMPLE