MARUTI SUZUKI Ciaz, Owner'S Manual

Page: 225 / 249

7-26
INSPECTION AND MAINTENANCE
79MH0-74E
Open the engine hood. Remove the seal-
ing rubber (1) and disconnect the coupler
(2). Push the retaining spring (3) forward
and unhook it. Then remove the bulb.
Install a new bulb in the reverse order of
removal.
79MH0706
NOTE:
You can see the position of retaining spring
from the hole of headlight.
Other General Lights
Bulb holder
54G123
(1) Removal
(2) Installation
To remove a bulb holder from a light hous-
ing, turn the holder counterclockwise and
pull it out. To install the holder, push the
holder in and turn it clockwise.
Bulb
54G124
(3) Removal
(4) Installation
There are two types of bulb, “Full glass
type” (1) and “Glass/metal type” (2).
To remove and install a full glass type bulb
(1), simply pull out or push in the bulb.
To remove a glass metal type bulb (2) from
a bulb holder, push in the bulb and turn it
counterclockwise. To install a new bulb,
push it in and turn it clockwise.
You can access the individual bulb or bulb
holders as follows.
Front Turn Signal Light (1)
Front Position Light (2)
79MH0707
Front Fog Light (if equipped)
1) Start the engine. Turn the steering
wheel to the opposite side of the replac-
ing fog light to replace the bulb easily.
Then turn off the engine.
79MH0752
2) Remove the clips (1).
(1)
(1)
(2)
(2)
EXAMPLE
(1)
(2)
(3)
(4)
EXAMPLE
(2) (1)
(1)
EXAMPLE