MARUTI SUZUKI Ciaz, Owner'S Manual

Page: 41 / 249

2-24
BEFORE DRIVING
79MH0-74E
Rear Center Seat Belt
80JS028
To tighten the belt, pull the free end of the
belt across alongside the lap strap.
80JS029
To lengthen, release the latch plate from
the buckle, pull the latch plate (adjuster) in
the direction of the arrow, at right angles to
the belt. The latch plate should then be
refitted into the buckle and the belt tight-
ened as previously described.
To unfasten the belt, press the release but-
ton on the buckle catch.
79MH0239
NOTE:
The word “CENTER” is marked on the
buckle for the rear center belt. The buckles
are designed so a latch plate cannot be
inserted into the wrong buckle.
Driver’s Seat Belt Reminder
79MH10202
There are two kinds of operations on the
driver’s seat belt reminder depending on
the vehicle’s specification.
Type 1
When the driver doesn’t buckle his or her
seat belt with the ignition switch in the “ON”
position or the ignition mode is “ON”, the
driver’s seat belt reminder light in the
instrument cluster will blink until the driver’s
seat belt is buckled.
Type 2
If the driver’s seat belt remains unbuckled
when the ignition switch is turned to the
“ON” position or the engine switch is
pressed to change the ignition mode to
“ON”. The reminder works as follows:
1) The driver’s seat belt reminder light will
come on.
2) After the vehicle’s speed has reached
about 15 km/h, the driver’s seat belt
reminder light will blink and a buzzer will
sound for about 95 seconds.
TO TIGHTEN
Low on hips
TO LOOSEN
Right angle
EXAMPLE
EXAMPLE
WARNING
It is absolutely essential that the
driver and passengers wear their seat
belts at all times. Persons who are
not wearing seat belts have a much
greater risk of injury if an accident
occurs. Make a regular habit of buck-
ling your seat belt before putting the
key in the ignition or pressing the
engine switch.