MARUTI SUZUKI Ciaz, Owner'S Manual

Page: 69 / 249

2-52
BEFORE DRIVING
79MH0-74E
Turn Signal Control Lever
65D611
Turn Signal Operation
With the ignition switch in the “ON” position
or the ignition mode “ON”, move the lever
up or down to activate the left or right turn
signals.
Normal turn signal
60MK013
Move the lever all the way upward or down-
ward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.
Lane change signal
60MK014
Sometimes, such as when changing lanes,
the steering wheel is not turned far enough
to cancel the turn signal. For convenience,
you can flash the turn signal by moving the
lever part way and holding it there. The
lever will return to its normal position when
you release it.
NOTE:
The turn signal and its indicator flash three
times even if you return the lever immedi-
ately after moving it.
NOTE:
The turn signal and its indicator can be set
whether they flash three times after the
turn signal lever is returned via the infor-
mation display. Refer to “Information Dis-
play” in this section.
NOTE:
You can customize the setting for the number
of times of flashing of the turn signal and its
indicator. Please ask an authorized MARUTI
SUZUKI dealer for the customization.
Hazard Warning Switch
79MH0231
Push in the hazard warning switch to acti-
vate the hazard warning lights. All turn sig-
nal lights and both turn signal indicators
will flash simultaneously. To turn off the
lights, push the switch again.
Use the hazard warning lights to warn
other traffic during emergency parking or
when your vehicle could otherwise become
a traffic hazard.
WARNING
To avoid possible injury, do not oper-
ate controls by reaching through the
steering wheel.
EXAMPLE
EXAMPLE
EXAMPLE