Martin VDO Face 5, User Manual

Page: 23 / 56

Physical installation 23
Flying panels in a flat array
To suspend an array of VDO Face 5™ video panels vertically to form a flat display surface, see below. To
suspend array of VDO Face 5™ video panels vertically to form a curved display surface, see “Flying panels
in a curved array” on page 36.
To suspend a vertical column of VDO Face 5™ panels, you must use a VDO Face system header. See
below (Single Header illustrated):
VDO Face system headers are available in two versions:
• Single Headers have one suspension eyebolt A and holes D at each end of the header for mounting
either side connection brackets or brackets for two further eyebolts. You can support one column of
panels from one Single Header.
• Double Headers have three suspension eyebolts A and holes D at each end of the header for mounting
side connection brackets. You can suspend two columns of panels from one Double Header.
Side connection brackets are supplied with headers (see next section).
A - Suspension eyebolt (primary attachment point)
B - Panel fastener plate
C - Panel fastener plate locking button
D - Mounting points for extra suspension eyebolts
or header connection brackets.
Figure 20: VDO Face Single Header
A
C
C
B
B
D
D