Martin VDO Face 5, User Manual

Page: 33 / 56

Physical installation 33
3. See Figure 27. On the header, slide the locking plates D away from the suspension eye E .
4. Lift the first panel up to the header and pass the vertical connection posts A in the top of the panel up
through the locking plates D in the header.
5. See Figure 28. While supporting the panel, slide the locking plates D in the header towards the
suspension eye E so that the locking plates engage in the grooves in the vertical connection posts A .
Make sure that the locking plate knobs F click into the locked position so that the locking plates are no
longer able to slide from side to side. Check that both locking plates are now latched onto the vertical
connection posts.
6. See Figure 29. In the top of the panel,
turn the locking levers B on both the
vertical connection posts A to the
Locked position G .
Figure 28: Closing locking plates in Single Header
D
D
E
F
F
Figure 29: Locking vertical connection posts
G
B
A