Martin VDO Face 5, User Manual

Page: 35 / 56

Physical installation 35
3. See Figure 32. with the two panels in position beside each other, push the first panel’s side-to-side
locking bar P out through the panel side rail and into the hole O in the second panel so that it is at
position Q in photo 2 (the second panel is not shown in the photos so that the locking bar bayonet
mechanism can be seen more clearly).
4. Turn the side-to-side locking lever R up to the Locked position to lock the bayonet mount S into the hole
in the second panel.
5. Turn the side-to-side tightening lever T up to the Locked position to tighten the bayonet mount and lock
the panels tightly together.
Securing the bottom of columns against lateral movement
After installing columns of panels, secure them against lateral movement by passing sturdy cable, straps or
webbing through the holes in the bottom of the bottom row of panels and fastening to a fixed anchoring
point.
Warning! Do not apply stress to panels or increase the load on supporting hardware by applying
downwards tension to the bottom row of panels.
Figure 32: Side-to-side panel fastening
P
R
1 2
3 4
Q
T
S