Martin VDO Face 5, User Manual

Page: 15 / 56

Physical installation 15
Stacking panels on floor stands
Warning! See “Safety Information” on page 6 for important safety information on using the VDO
Face Footer floor stand system.
Safety limits apply to the maximum number of VDO Face 5™ video panels that you can install
vertically using the Footer System. Respect the limits and instructions given in the following
section of this user manual, paying particular attention to the weight and position of ballast, or you
may create a stack of panels that is unstable and may fall, causing lethal injury or damage.
The VDO Face Footer System is a range of optional
floor stand accessories available from Martin® that
let you install VDO Face video panels in a stacked
array.
See Figure 5. The system consists of base units A ,
stabilizing legs B , vertical panel mount ladders C
and all required fastener hardware.
Safety limits with single row of
stabilizer legs
When stacking VDO Face 5™ video panels in
vertical columns on VDO Face Footer floor stands
with one single row of stabilizer legs installed on the
back of base units, see Figure 6. Fasten ballast
such as sand bags to the rear end of each stabilizer leg, i.e. as close as possible to the back of the
installation. The ballast must have at least the weight indicated in Figure 6 for the number of panels in the
column. Do not stack more than eight (8) VDO Face 5™ panels in a vertical column.
Figure 5: Face Footers floor stand system
A
C
B
Figure 6: Safety limit and ballast required with one row of stabilizer legs
Single stabilizer leg
Maximum 8 panels vertically
with 90 kg ballast fastened to end of leg
Number of panels
installed vertically
Ballast required at
rear end of each leg
1-3 0
4 15 kg (33 lbs.)
5 30 kg (66 lbs.)
6 45 kg (99 lbs.)
7 60 kg (132 lbs.)
8 90 kg (198 lbs.)