Martin VDO Face 5, User Manual

Page: 10 / 56

10 VDO Face 5™ user manual
Introduction
Thank you for selecting the Martin® VDO Face 5™ modular LED-based video display panels from Martin®.
Panels are available in HB (High Brightness) models that are optimized for intensity of output, and HC (High
Contrast) models with darker front surfaces that provide deep contrast. The two models are identical apart
from their different quick-release LED blocks.
The VDO Face 5™ range features:
• 5.208 mm (0.205 inch) pixel pitch and 96 x 108 pixels per panel image resolution
• 5000 nits performance (HB models)
• 3000 nits performance (HC models)
• Rich RGB with color resolution of 16 bits per color
• Weatherproofing to IP65: suitable for indoor and non-permanent outdoor installation
• Flying and stacked installation system options
• Integrated quick-locking vertical and side-to-side panel attachment system
• Quick-release hot-swappable LED blocks (four per panel)
• Silent convection cooling
• Dual power supply design for maximized protection from data throughput interruption
• Auto-sensing 100 - 240 V, 50/60 Hz switch mode power supply
For information about installing and using a P3 System Controller, see the user documentation supplied with
the Controller.
All Martin® video display and P3 controller user documentation is available for download from the Product
Support / Tech Docs pages at www.martin.com
Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to:
Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.
Warning! Read ‘Safety Information’ starting on page 6 before installing, powering, operating or
servicing VDO Face 5™ products.
A VDO Face 5™ panel is an ITE Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take appropriate measures.
Panels and flightcases
VDO Face 5™ panels are ordered as single panels
that are supplied in cardboard boxes.
To transport panels, pack them in the six-unit VDO
Face flightcases available from Martin® (see
“Accessories” on page 27) to ensure that they can
withstand the shocks that normally occur while
panels are in transit.
See Figure 1. Flightcases have space for storing
cables and installation hardware.
See also the information on modular flightcases for
the VDO Face Footer floor stand system on page 22.
Figure 1: VDO Face™ flightcase