34
VDO Face 5™ user manual
7. See Figure 30. Open the lower locking plates
H
in the bottom rail of the first panel.
8. Move the vertical connection posts
A
in the second panel to the
Unlocked
position
C
. Lift the second
panel up to the first panel and pass its vertical connection posts through the holes
I
in the bottom of the
first panel.
9. Push the locking plates
H
in the bottom of the first panel to the locked position
J
so that the plates
engage in the grooves in the vertical connection posts. Make sure that the locking knob at
J
clicks into
place so that the locking plates can no longer be opened. Check that the second panel is securely
attached to the first panel.
10. See Figure 29. In the top of the second panel, turn the locking levers
B
on the vertical connection posts
A
to the
Locked
position
G
.
11. Continue fastening panels together in a vertical column, using the procedure described above to guide
you. Make sure that all panels are securely and tightly locked together, and that locking plates cannot
move to the open position.
Fastening panels side by side
To fasten VDO Face panels side by side when
building a video wall:
1. See Figure 31. Note the position of the hole
O
in the side of the panel that acts as a
receptacle and accepts the side-to-side
locking bar.
2.
Warning! Check that the weight of the
panels to be fastened together is
supported vertically. Do not use
side-by-side fasteners to support the
weight of panels.
Figure 30: Closing lower locking plates
H
J
I
Figure 31: Hole for side-to-side locking bar
O
Summary of Contents for VDO Face 5
