Martin Tripix User Manual Download

Page: 38 / 44

Tripix user manual

Specifications

Physical

Tripix Fixture

Length .................................................................. Tripix 300: 300 mm (11.8 in.)

Tripix 1200: 1200 mm (47.2 in.)

Width .............................................. 61 mm (2.4 in.) including mounting bracket

Height ..................... 81.4 mm (2.8 in.) including mounting bracket and DIN rail

Weight ................................................................................... Tripix 300: 1200 g

............................................................................................. Tripix 1200: 4230 g

Tripix Power

Length .................................................................................... 447 mm (17.6 in.)

Width ........................................................................................ 141 mm (5.5 in.)

Height ......................................................................................... 68 mm (2.7 in.)

Weight ...................................................................................................... 5.8 kg

Dynamic Effects

Color mixing ................................................................................................ RGB

Red .......................................................................................................0 - 100%

Green ....................................................................................................0 - 100%

Blue ......................................................................................................0 - 100%

Color temperature control ........................................................ 2 000 - 10 000 K

Control and Programming

Color control modes ........ RGB (raw and calibrated), HSI and HSIC (calibrated)

Control options........................................... DMX, stand-alone and master/slave

Protocol ................................................................................. USITT DMX512-A

Firmware update ....................................................... Serial upload via DMX link

Optics

Light source ........................................................................................... 3-1 LED

Total LED power .............. Tripix 300: 24 W approx., Tripix 1200: 82 W approx.

Total output per 300 mm segment

Narrow (24° half-peak) ............................................................................. 360 lm

Total output per 1200 mm segment

Narrow (24° half-peak) ........................................................................... 1440 lm

Summary of Contents for Tripix













































Search results

Summary of Contents for Tripix

Reviews:

Related manuals for Tripix

Brands by name

Popular brands

Martin Tripix, User Manual

Search results

Summary of Contents for Tripix

Reviews:

Related manuals for Tripix

Brands by name

Popular brands