Martin Tripix Page 36 User Manual Download | Manualshive

Page: 36 / 44

background image

36

Tripix user manual

Figure 29: Fuseholder

Software installation

It may be necessary to upload new software (i.e. firmware) to the Tripix
fixtures if you believe that the product has a software-related fault or if
you want to update to a newer version. Software updates are available
from the Martin website (http://www.martin.com) and can be installed
via the DMX data link with the following items:

•

The Martin Uploader application, version 5.0 or later, downloadable

free of charge from the “After-Sales” area of the Martin website.

•

The Tripix main software update file, downloadable free of charge

from the “After-Sales” area of the Martin website (this file can be
downloaded automatically from within the Martin Uploader
application).

•

A Martin Universal USB/DMX Interface (part number: 90702045) or

similar PC/fixture hardware interface and a Windows PC.

Installing software

To install software in the Tripix fixtures:

1. Connect the PC and Universal USB/DMX Interface to the Tripix

fixture data input connector using the DMX input cable and an
RJ45 to 3-pin XLR adapter.

2. Upload the software as described in the Martin Uploader help file

or user documentation. The LED will flash during the upload.

3. When the upload is completed, the fixture will go back to its status

before the upload.

4. Software uploads can fail (most failures are caused by interference

on the data link). If the upload fails. Cycle power off and on and
repeat the upload. If the problem persists, contact the Martin
Service organization or its authorized agents for assistance.

«
...
34
35
36
37
38
...
»

Summary of Contents for Tripix













































Reviews:

No comments

Related manuals for Tripix

Brand: Malatech Pages: 8

Brand: Contest Pages: 8

Brand: Solight Pages: 3

Brand: Renkforce Pages: 92

Brand: Perel Pages: 14

Martin ERA 700 Performance IP

Brand: Harman Pages: 66

Brand: Chauvet Pages: 60

Brand: Jula Pages: 13

Blink Eco Series

Brand: Satco Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 1

Brand: Philips Pages: 1

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Ceramalux P-2257-D

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands