Martin Tripix, User Manual

Page: 4 / 44

PROTECTION FROM ELECTRIC SHOCK
•
Shut down power to the entire installation at the main power
distribution board and lock out power (by removing the fuse for
example) before carrying out any installation or maintenance work.
•
Disconnect the fixture from AC power before removing or installing
any cover or part and when not in use.
•
Connect the Tripix Power electrically to ground (earth).
•
Use only a source of AC power that complies with local building and
electrical codes and has both overload and ground-fault (earth-fault)
protection.
•
Before using the devices, check that all power distribution equipment
and cables are in perfect condition, are rated for the current
requirements of all connected devices.
•
Isolate all devices from power immediately if any cable, seal, cover or
other component is damaged, cracked or deformed. Do not reapply
power until repairs have been completed.
•
The Tripix Power is for indoor use only.
•
Refer any service operation not described in this manual to an
authorized Martin Service partner.
PROTECTION FROM BURNS
•
Do not operate the devices if the ambient temperature (Ta) exceeds
45° C (113° F).
•
The exterior of the fixtures and Tripix Power becomes hot, up to 65° C
(149° F) during normal operation. Ensure that accidental physical
contact with the devices is impossible.
•
Allow the fixture to cool for 5 minutes before servicing.
•
Keep combustible materials (for example fabric, wood, paper) at least
20 cm (8 in.) away from the devices.
•
Keep flammable materials well away from the devices.
•
Do not modify the Tripix Power or fixtures in any way not described in
this manual or install other than genuine Martin parts.
•
Use only Martin approved accessories to mask or modify the light
beam.
•
Do not attempt to bypass fuses. Replace defective fuses with ones of
the specified type and rating only.
•
Install the strips outdoors and the Tripix Power indoors in a well-
ventilated area only. Provide a minimum clearance of 5 cm (2 in.) and
ensure unrestricted airflow around Tripix Power and the fixtures.