manualshive.com logo in svg

Martin Tripix, User Manual

Share
Download
Martin Tripix User Manual Download Page 9

 

 

9 

Tripix user manual 

Physical installation 

Warning! Read "Safety Information" on page 3 before installing 
the devices. 

 

The safety and suitability of lifting equipment, installation location, 
anchoring method, mounting hardware and electrical installation 
is the responsibility of the installer. All local safety regulations 
and legal requirements must be observed when installing and 
connecting the devices. Installation must be carried out by 
qualified professionals only. 

The Tripix fixtures must be clamped onto a DIN top-hat rail that is 
securely anchored to a suitable flat surface. Ensure that the supporting 
structure can bear the weight of all installed devices plus an adequate 
safety margin. 

Make sure that there will be at least 5 cm (2 in.) of free space and 
unrestricted airflow around both the Tripix Power and the Tripix fixture. 

Warning! Do not use the Tripix fixture without a diffuser filter 
installed. 

Contact your Martin supplier for assistance if you have any questions 
about how to install this product safely. 

Location and orientation 

The Tripix fixtures are for outdoor installations with an IP rating of 66 
while Tripix Power is for indoor use only; 

•

  Do not bury the devices or locate them in a space that is more critical 

than IP66. 

•

  Allow 5 cm (2 in.) free space around both the Tripix Power and the 

Tripix fixtures. 

•

  Install the Tripix Power and the Tripix fixtures at least 20 cm (8 in.) 

away from any combustible materials (wood, paper, etc.) and well 
away from any flammable materials. 

•

  The housings of the Tripix fixture and the Tripix Power reach 

temperatures up to 65° C (149° F). Restrict public access or locate 
the devices so that they cannot accidentally be touched. 

Summary of Contents for Tripix













































Reviews:

No comments

Brands by name

Popular brands

Load more brands