manualshive.com logo in svg

Martin Tripix, User Manual

Share
Download
Martin Tripix User Manual Download Page 10

 

 

10 

Tripix user manual 

Mounting 

DIN rail 

The Tripix fixture is designed for mounting on standard 35 mm top-hat 
DIN rail. You can use the standard 35mm DIN Rail or use the Short 
Martin DIN rail 35mm for a more comfortable installation.  

 

Figure 1: Short Martin DIN rail 35mm 

 

Dimensions for the DIN rail supplied by Martin are given in Figure 1. 

Note that you cannot fasten the Tripix fixture mounting clamps directly 
over screws used to fasten DIN rail to the mounting surface. If a DIN 
rail mounting screw is in the way of a mounting clamp, move it to 
another slot in the DIN rail. 

Note that you must install extra screws through the DIN rail into the 
mounting surface to secure fixtures in vertical installations (see 
“Mounting the Tripix fixture vertically” on Page 11). 

 

Mounting the Tripix fixture 

Warning! The Tripix fixture must be mounted on a top-hat profile 
35 mm (1.4 inch) DIN rail that is securely anchored to a surface. 
The installation must conform to local electrical, building, safety 
and fire regulations. If there is a danger that the fixture may cause 
injury or damage if it falls, use a means of secondary attachment 
such as safety cables looped around the fixture.  

The short DIN rail from Martin (P/N 23819560) is just long enough to 
allow two Tripix fixtures to be mounted end-to-end. 

Summary of Contents for Tripix













































Reviews:

No comments

Brands by name

Popular brands

Load more brands