Martin Tripix, User Manual

Page: 18 / 44

18 Tripix user manual
Connection to power, fixtures and DMX is indicated on the Power
Inserter (see Figure 8). The DMX signal runs from “In” to “Out”; The
Tripix Power is connected to the plug marked “Power”, and Tripix
fixtures are connected to the end marked “Out”.
Power
In
Out
Figure 8: Connection instructions on Power Inserter
•
A DMX Input cable, P/N 91611337, that must be connected to the
Power Inserter cable for connection to a 3-pin XLR DMX output if
DMX control is required. This adapter cable must be ordered
separately.
Install the system following the rules below:
1. One Tripix Power must be connected to the maximum permitted
number of fixtures as one group. The DMX signal can be
connected between groups as shown in Figure 9.
Out In
Powe r
DMX
Ou t I n
Po wer
Figure 9: Connection of groups
DMX termination plug
DMX