24
Before 15 seconds has passed, push and release the
valet switch 6 times. Hold the button down on the 6th
press. You will hear 3 short chirp/beeps + 1 long
chirp/beeps. Release the button. You are now in “Alarm
Feature Programming (Group 3)” mode.
Step 1
Step 2
3X
5X + 1X (Hold)
One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
LED One Pulse
LED Two Pulse
LED Three Pulse
LED 4 Pulse
(Default Setting)
Step 3
HC5 Harness:
Black/White Wire
(-) Dome Light Output
Shock Sensor
Test Mode Off
HC2 Harness:
Brown Wire
(+) Siren Output
HC5 Harness:
Black/White Wire
(-) Horn Output
HC5 Harness:
Black/White Wire
Factory Security Rearm Output
HC3 Harness:
Light Blue Wire
2-Step Door Unlock Output
HC3 Harness:
Light Blue Wire
Factory
Security Disarm Signal Output
HC3 Harness:
Light Blue Wire
Start Status (Shock Sensor By
Pass Control) Output
Shock Sensor
Test Mode On
HC2 Harness:
Black/White Wire
Ground Output During
Start (Crank)
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm
exit of the programming mode.
Note: Waiting 15 seconds after the last command will also
cause the system to automatically exit the programming mode.
Step 4:
Exit Programming
With the ignition switch in the OFF position, turn the
ignition switch On - Off - On - Off - On - Off.
Remote Feature Programming
Press the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard then move on to the
next feature.
HC2 Harness:
Brown Wire
(+) Horn Output
Alarm Feature Programming (Group 2)
(continued)
Alarm Feature Programming (Group 3)
