23
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm exit of the
programming mode.
Note: Waiting 15 seconds after the last command will also cause the
system to automatically exit the programming mode.
Step 4
Exit Programming
With the ignition switch in the OFF position, turn the
ignition switch On - Off - On - Off - On - Off.
Before 15 seconds has passed, push and release the
valet switch 4 times. Hold the button down on the 4th
press. You will hear 2 short chirps/beeps + 1 long
chirp/ beep. You are now in “Alarm Feature
Programming (Group 2)” mode.
Step 1
Step 2
3X
3X + 1X (Hold)
One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
One LED Pulse
Two LED Pulses
Three LED Pulses
Four LED Pulses
(Default Setting)
Step 3
Double Unlock Pulse
Ignition Controlled
Door Lock Only
Ignition Controlled
Door Unlock Only
Ignition Key Controlled
Door Lock and Unlock
Doors Lock Before Start
All Door Lock / Unlock
Control Off
Pathway Illumination
Feature “Off”
Parking Lights “On”
for 30 Seconds Upon
Alarm Disarm
3.5 Second Door
Lock Pulse
0.8 Second Door
Lock Pulse
Ignition Key Door
Lock Control Off
Parking Lights “On”
for 30 Seconds When
Disarmed and “On” 10
Second when Armed
Door Lock with
"Comfort Features"
Doors Lock After
Shutdown
Doors Lock Before Start
and Doors Lock After
Shutdown
Remote Feature Programming
Press the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard then move on to the
next feature.
Comfort Feature: Some vehicles (Mercedes, BMW, VW,etc.) have a special “Comfort Feature”. When you lock the
door with the ignition key, you keep the key in the “lock” position for about 5 or 7 seconds and the windows will
close. If the vehicle has a “Comfort Feature” and you want the windows to closed upon Lock/Arm the security
system, you can set the door lock output to “Comfort Feature”.
Alarm Feature Programming (Group 1)
(continued)
Alarm Feature Programming (Group 2)
