8 - User Manual - Sigillo
®
1.5.2 Facsimile of Manufa
cturer’s CE Mark
ing Plate
As provided by the Machinery Directive 2006/42/EC, the machine
displays in a visible, legible and indelible way an affixed plate with
the following data:
•
Name and address of the manufacturer.
•
CE Marking (according to the Machinery Directive, annex III).
•
Label of the
machine’s
type and serial number.
•
Year of manufacturing.
1.6 Prohibition of putting into service
The machine cannot be put into service after being subjected to constructive modifications or
component’s
additions not
concerning the planned or extraordinary maintenance, if not declared in conformity with the 2006/42/EC Machinery Directive
and the other applicable EC directives.
WARNING!
IT IS ABSOLUTELY FORBIDDEN TO MODIFY THE MACHINE!
Whoever modifies the machine becomes its manufacturer and assumes all civil and criminal liabilities
provided for by law in force.
Whoever modifies the machine assumes the legal obligation of issuing a new CE Marking, new
installation manual and user manual for the end user and an own EC Declaration of Conformity.
The replacement of whatever is usually called spare part is not considered as a modification.
1.7 General Directions
WARNING!
It is forbidden for personnel unable to absorb and understand the contents of this manual to
operate the machine.
Before working with the machine, operators, maintenance personnel and those authorised to use it are required to know the
contents of this manual.
•
The owner of the machine is committed to personally check that people in charge are adequately trained.
•
The owner of the machine is committed to make sure that the above instructions are applied.
•
Personnel in charge of operating and maintaining the machine must be equipped with clothing that is suited to the
operations that needs to be carried out.
•
Personnel are committed to observing any warning, danger and obligation signs on the machine.
•
Personnel must reflect physical and moral qualities such to gain the employer’s full trust for taking the responsibility of
using the machine and must not partake of drugs, alcohol or medicine which could cause drowsiness, slow reflexes or
loss of balance.
•
The machine must only be used for the operations for which it was designed and built for. The manufacturer declines all
responsibility for any different use than what described in this manual, both during the warranty than afterwards.
•
Personnel must not tamper with protections and safety devices.
•
For the machine to work at is best and for the longest time, the user must make sure that maintenance is carried out at
the intervals shown in the specific sections of this manual and record the maintenance done in the respective tables of
the maintenance register. If the machine works in extreme conditions or is subjected to work overloads, intervals
between maintenance must be reduced.
•
Adjustments and repairs must only be carried out by qualified personnel.
