18 - User Manual - Sigillo
®
2.8 Residual risk
As for all machines, for the patented Sigillo
®
covering system it is impossible, during design, to eliminate all the risks
connected to proper and improper use of it; consequently it is also impossible for the manufacturer to provide for all the
safety systems. The proper use of the machine by the operators who run it alternately at different times, remains, in any
case, the most important factor to guarantee safety.
Perfect knowledge of injury prevention norms, methodical use of personal protective equipment and a good dose of common
sense, contribute to preserving the machine in a good state and avoiding accidents or dangerous situations.
Despite all this, conditions may occur which we will call “
RESIDUAL RISK
”
, which could be caused by:
•
Non-observance of the directions given in this manual, for which the manufacturer is exempt from all responsibility.
•
Any type or kind of incalculable factors for which the manufacturer is exempt from any responsibility.
2.9 Safety services and documentation provided to the user
2.9.1 Training course
After the covering system
s’
installation on the vehicle and delivery to the final user, Marcolin Covering s.r.l. (or authorised
retailer/installer) gives the owner (or delegated operator) a training and apprehension course on all the necessary
procedures to start, conduct, stop and maintain the machine in efficiency.
During the training, safety and operative prescriptions for the health of the operator and the other workers are also given.
The documentation on the implementation and certification of the training courses can be found in annex 6.2.
2.9.2 User manual delivery
This manual is mandatorily issued with each covering system and it is delivered to the final user from the authorised installer
of the covering system.
2.9.3 Safety signs and signals on the machine
The manufacturer applies some easy to read and intuitive plates and pictograms on the machine for informing about
possible dangerous situations.
WARNING
!
ALL SAFETY SIGNS MUST NOT BE REMOVED
IMPORTANT INFORMATION!
The presence of the safety signs
DOES NOT
exempt the operator from the training course or from the
perfect knowledge of the present manual.
Even if the plates are of a high quality, they can be damaged or become unreadable over the time. AT
THE FIRST SIGN OF DETERIORATION, REQUEST THE ORIGINAL SPARE PART TO MARCOLIN
COVERING SRL OR TO THE RETAILERS.
It is forbidden to use the machine if the safety signs are worn, illegible or removed.
