28 - User Manual - Sigillo
®
4.4 Ordinary maintenance
The ordinary maintenance must be carried out by the machine
’s
owner, within the deadlines set out in this manual.
4.4.1 General tightening up of the screw connections
After the first 20/30 operating hours and later on every three months, the screw connections have to be checked for
excluding any loosening on the machine and make the tightening up where needed.
WARNING!
Tighten up all screw connections!
OPERATION
ORDINARY MAINTENANCE
EXTRAORDINARY MAINTENANCE
GENERAL TIGHTENING UP OF THE
SCREW CONNECTIONS
First tightening after 20/30 working
hours, then quarterly
Yearly c/o manufacturer or authorised
workshop
4.4.2 Check the conservation status of metal structure and bows
OPERATION
ORDINARY MAINTENANCE
EXTRAORDINARY MAINTENANCE
CHECK METAL STRUCTURE AND
BOWS
quarterly
Yearly c/o manufacturer or authorised
workshop
WARNING!
If damages are ascertained,
DO NOT START THE MACHINE
,
bring it to a Marcolin’s
authorised workshop.
4.4.3 Check the tarpaulin conservation status
OPERATION
ORDINARY MAINTENANCE
EXTRAORDINARY MAINTENANCE
CHECK TARPAULIN
quarterly
Yearly c/o manufacturer or authorised
workshop
Check especially the wear and tear status of the most stressed parts like the front hooking and the lateral fastening of the
bows.
4.4.4 Check the cables
’
tensioning and conservation status
20/30 hours after assembling the covering system, tighten up again the cables.
OPERATION
ORDINARY MAINTENANCE
EXTRAORDINARY MAINTENANCE
CHECK CABLES
Weekly
Yearly c/o manufacturer or authorised
workshop
Most of all, make sure that the cables are not frayed. If so, go to an authorised workshop for replacement.
Check also that the cable torque is correct.
