Installation manual - Eletta
®
- 15
At this point the lateral manual transmission unit is fastened and it is possible to proceed with the fastening of the
corresponding side transmission group, on the opposite side of the cab guard.
•
Proceed fastening in the same way as the previous group, paying attention to the alignment of the two groups.
•
The unit is fastened laterally with 2 countersunk screws (
A
) and nut (
D
) and on the upper rear part, with hexagonal-head
screws (
B
) and nuts (
C
).
3.3.4 Telescoping shafts installation
In order to adapt to all types of tipping trailers, semi-trailers or roll-off bodies, the Eletta
®
cover is equipped with two
telescoping drive shafts that greatly reduce installation time.
Each shaft can be extended by 260 mm. This makes it possible to cover bodies having a width of 2290 to 2550 mm, without
any further intervention by the installer.
Right shaft
Left shaft
•
Attach the first shaft (left) on the side transmission
group with the cylindrical plug.
