Installation manual - Eletta
®
- 27
3.9 Lateral hooking system for the covering
The covering system has been designed to satisfy the various operative requirements. For this reason, two different types of
lateral fastening of the tarpaulin have been developed:
•
Standard closure with automatic “L” hooking
.
•
Hermetic closure with elastic strings.
3.9.1 Standard
closure with automatic “L” hooking system
With this lateral closure system, the L-hooks automatically fit into the
respective U-clamp terminals fastened on the side of the tipper body.
When the tipper body is covered the tarpaulin is automatically blocked
and the vehicle is ready for moving on the road.
For installing, proceed as follows:
•
Move the covering and cover the tipper body entirely.
•
Define the fastening positions of the safety hooks.
For fastening the covering, 2 or 3 safety hooks supplied in different
heights are planned to be evenly distributed along the side of the tipper
body.
The number of safety hooks is in any case not binding as it can change
according to the length of the tipper body or the customer’s requir
ements.
Note:
The positioning of the safety hooks is essential for the proper working of the hooking system.
•
Lean the safety hook against the lateral side of the bow
support (1);
•
Fasten the safety hook with the supplied round-head
screws (2) and the supplied self-locking nut (3).
Note:
Apply medium threadlocker Loxeal 54.03 for the
supplied screws.
