Installation manual - Eletta
®
- 35
3.11.9 Machine stop in safety conditions
•
Release the control pushbutton on the Motor Control Unit or on the remote control.
•
Set the machine in EMERGENCY STOP by pressing the mushroom pushbutton stated as no.6 on the Motor Control
Unit.
•
For setting the machine in SAFETY SHUTDOWN (if it is necessary to leave the vehicle unattended), remove the key
from the emergency pushbutton (no. 6).
3.11.10 Retraction of the Eletta
®
tarpaulin for uncovering the tipper body
In the starting position of the system, the tarpaulin is outstretched on the tipper body. To fold it operate as follows:
•
Remove all elastic strings (if provided for the version installed on your vehicle) from the lateral hooking points so that the
covering can move freely.
•
Insert the key in the emergency pushbutton.
•
Turn the key in CLOCKWISE direction to unlock the emergency pushbutton for giving the consent to restart the
machine:
By starting the Motor Control Unit gives out an acoustic signal.
On remote control
: PRESS THE PUSHBUTTON no. 1 (UNCOVERED)
On Motor Control Unit
: PRESS THE PUSHBUTTON no. 4 (UNCOVERED)
•
Fold the tarpaulin completely and release the control pushbutton. The Motor Control Unit is equipped with an automatic
motor shut-down when covering reaches the end stop.
•
Carry out a quick but attentive control to verify that everything is in good order before starting the tilting movement of the
tipper body.
3.11.11 How do I interrupt the machine operations?
Follow the process described in paragraph 3.11.6 .
3.11.12 How do I stop the machine in case of emergency?
Follow the process described in paragraph 3.11.7 .
3.11.13 Machine stop in safety conditions
Follow the process described in paragraph 3.11.9 .
3.11.14 In case of empty tipper body
When the tipper body is totally empty, two different behaviours of the operator are required:
•
If the tipper should be loaded again on the same place where the unloading happened, the operator is allowed to let the
elastic strings removed (if these are part of the equipment). Then, after loading, the operator unfolds again the tarpaulin
and fastens the elastic strings properly.
•
If the vehicle should move on the road with empty tipper body, it is mandatory to fasten the elastic strings to their frontal
hooking points to prevent any risks of entanglement for persons or objects while travelling on the road.
•
Push the emergency pushbutton to set the machine in SAFETY SHUTDOWN and remove the key.
•
Carry out a quick but attentive control to verify that everything is in good order before moving the vehicle on the road.
