32 - Installation manual - Eletta
®
Once the main components are fastened, proceed with wiring the system.
Note:
For a better understanding, consult the wiring diagram shown in paragraph 6.1
•
By use of the supplied cables, connect the battery to the power supplying terminals of the
Motor Control Unit;
•
Connect a system safety fuse (70 A) (not supplied) to the positive pole of the power
supply cable.
WARNING!
Do not reverse polarity while wiring!
•
Then connect the Motor Control Unit output (yellow flat terminals) to the stationary
contact plate;
•
Connect the motor to the movable contact plate.
Note:
Make sure that cables are firmly fastened to the tipper body in order that they would not form an obstacle or cause an
entanglement risk.
Note:
The connection of the motor polarities determines the correspondence between the switching command and the
related function.
3.11 Switch panel of the machine
3.11.1 Description of the Motor Control Unit
The Motor Control Unit consists of:
1.
Control unit 24V power supply terminals
2.
Motor terminals
3.
Aerial
4. UNCOVERED
switch
5. COVERED
switch
6.
Emergency mushroom pushbutton with safety lock
WARNING!
It is absolutely forbidden to use the Motor Control Unit when the vehicle is moving.
The constructor declines any responsibility.
