Installation manual - Eletta
®
- 23
3.6 Installation of the protective casings - hand-operated version
After having fastened both ropes for handling, proceed to the insertion and fastening of the casings.
The equipment includes n° 2 casing for the protection of the gears and n° 3 casings for the coverage of the transmission
shafts.
•
Insert the first gear protective
casing on the right or left side
of the cab guard
(depending
on the placement of the
manual transmission)
, and
screw it to the lateral drive
unit with the supplied screws:
one at the bottom of the
casing and the other laterally.
•
Insert
the
second
gear
protective casing on the
opposite side to the previous
one, and screw the lateral
drive
unit
with
the
appropriate screws supplied:
one in the bottom of the
casing and the other laterally.
•
Place the left protective casing shaft on the pulley
support of the left lateral manual transmission
group.
•
Place the right protective casing shaft on the
pulley support of the right lateral manual
transmission group.
