Marani LPP-480F, User Manual

Page: 12 / 64

−
DANTE Output Routing
- the output DANTE-1can take the signal from the output of the FIR-1 or FIR-5 block, or from
OUT-1
or from OUT-5
- the output DANTE-2 can take the signal from the output of the FIR-2 or FIR-6 block, or from
OUT-2 or from OUT-6
- the output DANTE-3 can take the signal from the output of the FIR-3 or FIR-7 block, or from
OUT-3 or from OUT-7
- the output DANTE-4 can take the signal from the output of the FIR-4 or FIR-8 block, or from
OUT-4 or from OUT-8
−
FIR BLOCK
the FIR-1,FIR-2,....FIR-8 can be configured under utility menu “FIR Config.” (open it using the
button Utility)
the System have split out the FIR block in two section FIR-1 to FIR-4 and FIR-5 to FIR-8 in order
to have more flexibility on the number of the Taps of the FIR.
With the configuration present on the 1
st
row, the system have 4 FIR with 1024 Taps.
With the configuration present on the 2
nd
row, the system have one FIR on channel 2 and one FIR
on channel 4 with 2048 Taps, the channel 1 and 3 have not FIR
With the configuration present on the 3
rd
row, the system have one FIR on channel 3 with 3072
Taps and one FIR on channel 4 with 1024 Taps, the channel 1 and 2 have not FIR
With the configuration present on the 4
th
row, the system have one FIR on channel 4 with 4096
Taps, the channel 1,2 and 3 have not FIR.
This is true also for the section FIR-5 to FIR-8
is a FIR Block is not “Bypassed” when the User, click with the mouse (left button) on the label “xx