Marani LPP-480F, User Manual

Page: 19 / 64

Noise Gate
In the Noise Gate control is possible edit the Bypass, Threshold, Release-Time, Attack-Time.
To change the value use the same management used for EQ
RMS Compressor
In the RMS Compressor control is possible edit the Bypass, Threshold, Ratio, Knee, Release-Time,
Attack-Time, Make-up (same on the output channel). To change the value use the same
management used for EQ
DELAY
on the Delay control is possible select the unit of the delay (time [ms], distance [m]), change the
value using the text-box or the buttons left/right below the text-box
Vu-Meter Channel
the user can select what see on the Meter: BG=Before Gain, AG=After Gain, AC=After
Compressor
(on output page there are: AG=AfterGain, BL=Before Limiter, AL=After Limiter)