Marani LPP-480F, User Manual

Page: 10 / 64

Routing Page:
on the routing page is possible select:
−
Headroom: when the check-box is set, on the relative input will be add +12dB
−
Input source: the User can change the input source in pairs,
a. source A/B can be set as ANALOG A/B or DIGIATAL A/B
b. source C/D can be set as ANALOG C/D or DIGIATAL C/D
c. source E/F can be set as DANTE A/B or the selection on the Source A/B
d. source G/H can be set as DANTE C/D or the selection on the Source C/D
On the utility menu “Src Settings” (open it using the button Utility) is possible to set the
automatic source priority “
Autoswitch ” on channel E/F and G/H.
When the “Enable Autoswitch on Channel E/F” is set then, independently of the set on the
Source E/F, if the signal is present on the DANTE input A/B, the source E/F will be set
automatically to DANTE A/B.
When the “Enable Autoswitch on Channel G/H” is set then, independently of the set on the
Source G/H, if the signal is present on the DANTE input C/D, the source G/H will be set
automatically to DANTE C/D
−
Noise Generator: on this frame is possible to set the Noise generator type (White, Pink) and the
level of the noise. When the Noise Generator is enabled then in all input there is the Noise
signal independently of the set on the Source channel