Marani LPP-480F, User Manual

Page: 25 / 64

To store the current parameter set on the “Edit” window, the User must
1. select the position (from1 to 30)
2. input a name for the program on the “Edit Name” text-box (the max length of the name is 16
characters).
3. Press the button “Store”
after this three steps, the current configuration is saved to device and it can be recall from sw PC or
recall from the User Interface of the device.
If the System working in ADMIN mode then is possible also see a “Lock Program”check-box
If the Admin set this check box then the program stored will be locked and in that case the User
can't overwite this program. If the “Program Store Lock” is enabled then the User can't use the
function Store Program (the button is disabled)
RECALL PROGRAM
after press the button the system open the following window to recall a program (stored by
PC or device) from the device.
The User can recall up to 30 program.
to recall a program the user must select the program and press the button “Recall”
when the system recall the program, if the option “Keep Actual Mutes” present on the Utility Page
is set then the system replace the status of the mute present on the program recalled with the status
of the current Mute.