OPERATION SUMMARY - Section 3
MTS-3000 SERIES OPERATION AND REFERENCE MANUAL 3-7
CU M004 01A
###################################
0$17$
#
7(67
#
6<67(06
4. OUTPUT STATUS LEDS
Illumination of these LEDs indicates that the outputs are enabled and capable of delivering energy
to a connected load, even if the output settings are presently at zero. If a module doesn’t have a full
complement of output sources, only those outputs equipped with an output source will illuminate.
5. OUTPUT TERMINALS
Connection is made here to the device(s) under test.
3.2 REAR PANEL LAYOUT
3.2.1 MTS-3000 Control Module Rear Panel
FIGURE 3.5 CONTROL MODULE REAR PANEL
1. COOLING INTAKES
For adequate cooling, ensure that these are not obstructed.
2. COOLING EXHAUST
Ensure that warm air exiting isn’t restricted nor reflected back towards intakes.
3. AC INLET
For 120V or 240V main supply, as indicated by panel label.
4. COM 1 RS232C PORT
Female DB-9 serial port wired as a DCE (Data Communications Equipment) for external PC or
DUT.
5. IRIG B CONNECTORS (OPTIONAL)
Connect to IRIG B datastream from GPS receiver.