Manitou MLA 628 -120 LSU 3-E2 Series, Operator'S Manual

Page: 109 / 130

3 - 29 3 - 29
E - EVERY 1000 HOURS SERVICE E - EVERY 1000 HOURS SERVICE
Carry out the operations described previously as well as the following operations. Carry out the operations described previously as well as the following operations.
E1 - F E1 - F
UE UEL L T TA AN NK K
CLEAN CLEAN
While carrying out these operations, do not smoke or work near a flame. While carrying out these operations, do not smoke or work near a flame.
Park the lift truck on level ground with the I.C. engine stopped. Park the lift truck on level ground with the I.C. engine stopped.
- Inspect the parts susceptible to leaks in the fuel circuit and in the tank. - Inspect the parts susceptible to leaks in the fuel circuit and in the tank.
- In the event of
- In the event of a leak, a leak, contact your dealer contact your dealer..
Never try to carry out a weld or any other operation by yourself, this could provoke an explosion Never try to carry out a weld or any other operation by yourself, this could provoke an explosion
or a fire. or a fire.
- Place a container under drain plug 1 (fig. E1/1) and unscrew the plug. - Place a container under drain plug 1 (fig. E1/1) and unscrew the plug.
- Remove cap 2 (fig. E1/2). - Remove cap 2 (fig. E1/2).
- Let the fuel flow and flush with 2 gal.of clean fuel by filler port 3 (fig. E1/2). - Let the fuel flow and flush with 2 gal.of clean fuel by filler port 3 (fig. E1/2).
- Install and tighten drain plug 1 (fig. E1/1) (tightening torque 26 ft/lb).
- Install and tighten drain plug 1 (fig. E1/1) (tightening torque 26 ft/lb).
- Fill the fuel tank with c
- Fill the fuel tank with clean fuel (see : 3 - MAINTENANCE lean fuel (see : 3 - MAINTENANCE : LUBRICANTS AND FUEL) f : LUBRICANTS AND FUEL) fil- il-
E1/1 E1/1
E1/2 E1/2
1 1
While carrying out these operations, do not smoke or work near a flame. While carrying out these operations, do not smoke or work near a flame.
WARNING WARNING
Never perform welding on the fuel system, this could Never perform welding on the fuel system, this could cause an explosion or cause an explosion or
a fire. a fire.
WARNING WARNING
CONTENTS CONTENTS
https://www.forkliftpdfmanuals.com/