Manitou MLA 628 -120 LSU 3-E2 Series, Operator'S Manual

Page: 97 / 130

3 - 17 3 - 17
B5 - H B5 - H
YD YDRA RAUL ULIC IC OI OIL L LE LEVE VEL L
CHECK CHECK
Park the lift truck on level ground with the I.C Park the lift truck on level ground with the I.C. engine stopped, . engine stopped, and the boom retracted and and the boom retracted and
lowered as far as possible. lowered as far as possible.
- Refer to gauge 1 (fig. B5). - Refer to gauge 1 (fig. B5).
- The oil level is correct when it is at the level of the red point.
- The oil level is correct when it is at the level of the red point.
- If necessa
- If necessary, ry, add oil (see : 3 - add oil (see : 3 - MAINTE MAINTENANCE NANCE : LUBRIC : LUBRICANTS AND FUEL) ANTS AND FUEL)..
- Remove cap 2 (fig. B5). - Remove cap 2 (fig. B5).
- Add oil by filler port 3 (fig. B5).
- Add oil by filler port 3 (fig. B5).
Use a clean funnel and clean the underside of the oil drum before filling. Use a clean funnel and clean the underside of the oil drum before filling.
- Put the cap back. - Put the cap back.
- Check visually that there is no leakage in the tank and pipes.
- Check visually that there is no leakage in the tank and pipes.
Always maintain the oil level at maximum as cooling depends on the oil flowing through the tank. Always maintain the oil level at maximum as cooling depends on the oil flowing through the tank.
2 2 2 2
B B4 4/ /4 4 B B4 4/ /5 5 B B4 4/ /6 6
3 3
4 4
5 5
5 5
5 5
8 8
6 6
9 9
7 7
1 1 1 1
B5 B5
1 1
2 2
3 3
Use a clean funnel and clean the oil nozzle before filling. Use a clean funnel and clean the oil nozzle before filling. IMPORTANT IMPORTANT
B6 - W B6 - W
IN INDS DSCR CREE EEN N WA WASH SHER ER LI LIQU QUID ID LE LEVE VEL L
CHECK CHECK
- Open the I.C. engine cover. - Open the I.C. engine cover.
- Check visually the level.
- Check visually the level.
- If nec
- If necessary add windscreen washer essary add windscreen washer liquid (see : 3 - liquid (see : 3 - MAINTENANCE MAINTENANCE : LUBRICANTS AND : LUBRICANTS AND
FUEL) by filler port 1 (fig. B6). FUEL) by filler port 1 (fig. B6).
B7 - C B7 - C
A AB B DO DOOR OR
GREASE GREASE
Clean and lubricate the points 1 (4 lubricators) (fig. B7) with grease (see : 3 - MAINTE- Clean and lubricate the points 1 (4 lubricators) (fig. B7) with grease (see : 3 - MAINTE-
NANCE NANCE : LUBRICANTS : LUBRICANTS AND FUEL) and r AND FUEL) and remove the surplus emove the surplus grease. grease.
B6 B6
B7 B7
1 1
1 1
1 1
CONTENTS CONTENTS
https://www.forkliftpdfmanuals.com/